Proven Tips to Fix Orbi Satellite Flashing White Issue
In the 21st century, nobody can imagine a life without an internet connection. Perhaps, this is the reason why a plethora of people have turned towards not just purchasing but also setting up the Netgear Orbi system. However, despite a successful setup via the Orbi app, users have been facing one particular issue with the device, i.e. Netgear Orbi satellite flashing white. This issue is particularly pointing towards the inability of the device from getting updated to its latest version.
In case, you are also experiencing the same issue, then it is recommended that you make your way to the tips outlined below and learn how to resolve it in a flash.
Why Does Blinking Orbi White Light Really Mean?
You should know that when the Orbi satellite is applying a configuration process or updating its firmware, that is when the LED light flashes white. It will stop blinking once the process comes to a halt. However, the problem arises when it refuses to turn solid. This means that something went wrong while you were trying to update the firmware to its latest version via the web address of your Orbi router, i.e. orbilogin.com. To reverse this scenario, you need to read the tips written in the following section.
How to Fix Netgear Orbi Satellite Flashing White Issue?
1. Power Cycle the Netgear Orbi
The most obvious way to get rid of the Netgear Orbi satellite flashing white issue is to power cycle or restart your networking device. This is a technique which is followed by every non-tech user. And the good thing is that it has proved to work for most of them. Chances are that it might work for you as well.
To restart your satellite, you need to power it off and disconnect it from its socket. Now, the time has come for you to wait for some time and then do the opposite of the first two steps.
2. Sync the Orbi Devices Again
Another reason why you are struggling to make amends with the Netgear Orbi satellite flashing white issue is that one device lost touch with the other in the middle of the firmware update process. In this case, you need to re-sync the router to the satellite by pressing the sync button on each of them.
After following this tip check if you are able to resolve the Orbi satellite flashing white issue or not. FYI, this hack can also help one to fix the Orbi satellite not connecting issue.
3. Check the Internet Connection
Chances are that your internet connection is running at the pace of a snail thereby becoming the third reason why you are stuck with the Netgear Orbi satellite flashing white issue. To get it fixed, call your Internet Service Provider. Maybe something is wrong from his end which is not letting the internet catch speed.
If everything is top-notch from the side of your ISP, then it means the connection between your router and modem is weak. Thus, avoid continuing connecting them wirelessly.
4. Reduce the Extra Devices
Now that you have decided to connect your devices with a wire, make sure that the distance between them is not too much as it can make it difficult for the signals to get transmitted throughout the house. Also, avoid placing them too close. The reason being, their signals can clash and cause more technical issues for you.
And if that happens, then regardless of the number of tips that you follow, you will not be able to resolve the issues that will get served on your table.
5. Relocate the Netgear Satellite
Where exactly have you placed the Netgear Orbi router? Is it kept near mirrors, fish tanks, baby monitors, cordless phones, washing machines, aluminum studs, Bluetooth speakers, refrigerators, microwave ovens, treadmills, televisions, and much more? Well then, they are not good for your device as they can prevent it from performing well.
To get things covered, immediately change the location of your device and keep it far away from these examples. Additionally, do not keep it near thick concrete walls.
We hope that after following the troubleshooting tips mentioned above in this blog, you will be able to resolve the Netgear Orbi satellite flashing white issue in a productive manner. In case, you are still frustrated because of the same issue, then restoring your networking device to its default factory mode will be able to help you out. To go about this process, you just need to locate and press the reset button on it using an oil pin and hold on for some time till the time; the device does not start rebooting.
As soon as the Orbi reboots, perform Orbi router setup from scratch using either the manual method or the Netgear Orbi application. The choice is yours.